Puede gestionar los productos de su tienda utilizando la página "Productos", en el menú "Catálogo".
Secciones en este capítulo:
Introducción a la página de producto
Para crear un nuevo producto, desde la página "Catálogo" haga clic en "Nuevo producto" (o utilice el atajo de teclado CTRL + P): Abrirá la denominada página de producto, donde puede crear nuevos productos o editar los existentes.
En PrestaShop 1.7, la página del producto está organizada en pestañas:
- Ajustes básicos: contiene todo lo que necesita para crear un producto de manera rápida y fácil. Sin embargo, si necesita añadir más detalles a su producto, debe echar un vistazo a las otras pestañas.
- Cantidades, Combinaciones o Producto virtual: defina las cantidades del producto y otras opciones relacionadas con el stock. Cuando su producto tenga combinaciones, la pestaña se renombrará a Combinaciones. Aquí es donde se administran todas sus combinaciones. Por otro lado, si tiene un producto virtual, aquí es donde debe subir el archivo asociado, si lo hay.
- Transporte: ofrezca detalles que pueden tener un impacto en la entrega del producto.
- Precios: refine sus precios mediante precios específicos o precio por unidad (entre otras opciones de precios disponibles).
- SEO: administre la meta descripción o URL del producto para asegurarse de que se encuentran optimizadas para los motores de búsqueda.
- Opciones: características adicionales para gestionar la visibilidad de su producto, referencias específicas, archivos adjuntos o proveedores. También es aquí donde puede establecer la personalización.
Nombre del producto
El primer campo a rellenar es el nombre del producto, que aparecerá en los resultados de los motores de búsqueda y en la URL de la hoja del producto de forma predeterminada. Junto al campo encontrará un selector de idioma, que le permite elegir el idioma en el que desea editar o crear el producto.
Debe dar un nombre al producto en al menos el idioma por defecto utilizado en su tienda antes de poder guardarlo. No podrá guardar el producto hasta que no le asigne un nombre.
Asegúrese de traducir cada campo en todos los idiomas disponibles en su tienda.Para ello, haga clic en el selector de idioma situado junto al campo del tipo de producto, y seleccione el idioma en el que desea editar el texto del producto.
Tipo de producto
Esta segunda opción es esencial: indica si el producto es un pack de productos (una combinación de al menos dos productos existentes), un producto virtual (archivo descargable, servicio, etc.), o simplemente un producto clásico que se envía por correo. Por ahora, sólo analizaremos el producto clásico, y trataremos los packs de productos y productos virtuales en próximas secciones de este capítulo.
Es posible que haya habilitado varios idiomas en su tienda, para vender en más países. Si desea realmente atraer con más fuerza a clientes de otros países, todo el contenido de su tienda (descripción del producto, títulos, etc.) deben traducirse en esos idiomas.
Para traducir el contenido de su producto a otro idioma, solamente tiene que seleccionar el idioma con el que quiere trabajar desde el selector de idioma situado junto al campo del tipo de producto. La página del producto se actualizará con el contenido disponible en el idioma seleccionado. Puede cambiar de un idioma a otro sin tener que guardar su trabajo entre el cambio de idiomas. Sólo asegúrese de que está editando el contenido en el idioma correcto.
De manera predeterminada, la página del producto mostrará el contenido en el idioma predeterminado de su tienda.
Para añadir nuevos idiomas a su tienda, diríjase a la sección Internacional. Puede añadir un idioma desde la página "Traducciones", como también añadir un paquete de localización desde la página "Localización". Encontrará más información en el capítulo international section of the documentation.
- Ventas. Abre la página "Detalles del producto" del panel de control de estadísticas (menú "Estadísticas"), mostrándole una gráfica de las visitas a la página de este producto, y también sus ventas.
- Lista de productos. Novedad en PrestaShop 1.7. Muestra un listado de todos los productos de su tienda permitiéndole navegar rápidamente de un producto a otro.
- Ayuda. Abre la ayuda contextual en una columna, con la página de la Guía del usuario correspondiente a la página del producto.
En la parte inferior de la página, varias acciones son posibles:
- Eliminar (icono papelera). Elimina toda la información introducida del producto actual, incluyendo sus imágenes, combinaciones, características, etc.
- Vista previa. Muestra la página del producto tal y como la verán sus clientes en su tienda en el front-office. Esto es muy útil, ya que funciona incluso si el producto está deshabilitado
- En línea / Sin conexión. Aquí es donde activa o desactiva su producto. Por defecto está desactivado, por lo que sus clientes no podrán verlo en su tienda.
Duplicar. Guarda el producto actual, y a continuación crea una copia exacta del producto actual y lo lleva a la página del nuevo producto.Esto es muy útil cuando prefiera utilizar los datos del producto actual como una plantilla para otro nuevo producto, y así no tiene que volver a escribir todos los datos del nuevo producto manualmente. Por ejemplo, dos productos pueden ser muy diferentes, pero pueden compartir las mismas combinaciones, los mismos transportistas o el mismo proveedor.
ISi necesita crear diferentes versiones de un mismo producto, a causa de su variedad de colores, capacidad, tamaño, etc., debe crear combinaciones para el producto actual en lugar de duplicarlo X veces. Revise la opción "Combinaciones" en la pestaña "Ajustes básicos", la cual se explica en la sección "Crear un producto con combinaciones" de este capítulo.
- Ir al Catálogo. Guarda los cambios que haya realizado en cualquiera de los datos del producto actual y lo llevará de nuevo a la lista de productos.
- Añadir nuevo producto. Guarda los cambios que haya realizado en cualquiera de los datos del producto actual y abre una nueva página para crear un nuevo producto.
- Guardar. Guarda los cambios que haya realizado en cualquiera de los datos del producto actual y abre una nueva página para crear un nuevo producto. Esto es particularmente útil cuando desea moverse entre las distintas pestañas disponibles sin perder las modificaciones del producto introducidas en la pestaña actual, o para ver sus cambios aplicados inmediatamente.
Atajos de teclado
Algunos atajos de teclado se han introducido en PrestaShop 1.7 para ayudarle a ahorrar tiempo cuando necesite crear varios productos consecutivamente. El comportamiento es el mismo que se describe anteriormente, y funciona para las siguientes opciones:
- Ir al Catálogo: CTRL+Q
- Guardar: CTRL+S
- Añadir nuevo producto: CTRL+P
- Duplicar: CTRL+D
Crear un producto
La página de producto, ha sido rediseñada en PrestaShop 1.7, facilitando la creación de un producto gracias al aumento del número de pestañas.
La pestaña "Ajustes básicos" proporciona las principales opciones necesarias para crear un producto básico: en unos pocos clics podrás crear un nuevo producto. Desde ésta también puede navegar a través de las otras pestañas disponibles para añadir más detalles a su producto.
La sección de imágenes se encuentra en la parte superior izquierda de la pestaña "Ajustes básicos". Debe subir todas las imágenes del producto, incluyendo las de todas sus combinaciones (color, tamaño, forma, etc.).
Para añadir una o más imágenes a su producto:
Arrastre y suelte los archivos de imágenes directamente desde la carpeta que las almacena, o haga clic sobre "seleccionar archivos" (o en cualquier parte de la sección de imagen) para buscar y abrir la carpeta que contiene sus imágenes. Puede seleccionar tantas imágenes como sea necesario manteniendo pulsada la tecla Ctrl mientras selecciona archivos, o puede realizar su selección de una en una. El tamaño máximo predeterminado para un archivo de imagen es establecido por PrestaShop según la configuración PHP de su servidor. Este tamaño puede ser establecido en la página "Ajustes de imágenes", bajo el menú "Diseño".
Imagen de portada
Las imágenes subidas aparecen como miniaturas. La primera de ellas será utilizada como imagen de portada para el producto. Esa imagen de portada también aparecerá automáticamente en la página del producto de su tienda.
Puede cambiar la imagen de su portada haciendo clic en la miniatura de la imagen: los ajustes para esta imagen seleccionada se mostrarán en pantalla. Desde allí puede marcar o desmarcar la casilla de verificación "Imagen de portada", para definir si la imagen seleccionada debe ser la de portada o no.
Zoom y Título
When you click on "Zoom" the image will appear in its real format, in case you want to have a closer look at it.
Each image can have a caption: use it to briefly describe the image (and the product). If you have several languages, don't forget to translate it!
Once you have uploaded all your product images, you can modify their order by drag-and-dropping each image. You can also add more images by clicking on the "+" icon, or dropping it.
Summary and Description
Describing your product well is essential, both for the customer (the more information, the better) and search engines (it will help your shop appear in more search requests).
At the bottom of the screen, the two description fields each serve different purposes:
- The "Summary" field enables you to write a short description that will appear in search engines and in the description for your product.
This field is limited to 400 characters by default: if you exceed that limit, PrestaShop will warn you with a message in red below the field. You can change that limit in the "Products" preference page, where you will find the "Max size of product summary" option.
- The "Description" field enables you to write a full description of your product, which will appear directly on the product page. The text editor offers a wide range of options for creating visually attractive descriptions (font, size, text color, etc.).
While this second field has no limits, there is such thing as too much content: strive to provide the essential information in a compelling way, and your product should be good to go.
Below the product descriptions, you can several options. The "Add a feature" option is for specifying your products' features (i.e. weight, material, country of origin, etc.).
When you create features and values (i.e. wool knit and micro-fiber materials), you assign them to the products when it is appropriate. This means that you do not have to fill out the features fields for each of your products but instead simply fill in the necessary values and apply them later.
Be aware that contrary to the combinations, these values do not change, and are valid for the general product (meaning: all your combinations will share these same features).
Adding a feature
Before adding a feature to a product, you must create it for general use in your shop. You should go to the "Attributes & Features" page of the "Catalog" menu for this.
Feature and feature value creation are explained in details in the dedicated section of the guide.
Assigning a value to a feature
We will assume here that you have already set all your features and feature values.
When clicking on "Add a feature", a drop-down menu appears, listing all of your shop's features. Select which feature you want to add. Next, you can either assign one of the pre-defined values (as set when creating the feature) if there are any available, or set a value manually in the "Customized value" field.
If no value is available for a feature, the mention "No result found" appears.
If you choose to use a custom value, do not forget to set it for every language that your shop supports. Use the language code selector at the top of the page to change the language.
If there are pre-defined values available, they will appear in a dropdown list. Simply click it and choose the correct value.
Once you have set all the relevant features, save your changes to see them immediately applied in the front-page.
Remember: If a feature does not have any value assigned to it, it will not be taken into account for this product, and will not be visible on your shop.
The same way you can add a feature, you can add a brand. Click on "Add a brand" and choose a brand in the dropdown menu.
If the brand you want isn't available in the drop-down menu, go to the "Brands & Suppliers" page to create a new brand.
A product can only be associated with one brand.
The "Add a related product" field gives you the option of choosing relevant products to associate with this product, to suggest them to your customers when they visit the product's page (if the theme supports it). Click on "Add a related product", type in the first letters of product and select it. The product is then added at the bottom of the field.
You can associate a product with as many other products as you deem necessary. Click on the trash icon to delete the product association.
An association goes one way only: the associated product will not feature an association to the current product in its setting page.
You will often sell the same product under different versions: they share the same overall name, but they might differ by their color, their capacity, their screen size, and other attributes. Most of the time, these attributes come together: you could have the red version of the product available with either 1 Gb capacity or 2 Gb, or with 12'' screen or a 15'' screen. This is why PrestaShop calls these versions "combinations": your stock of products can be made of several variations of a single product, which in effect are simply its attributes combined in specific ways.
If you need combinations for your product, select "Product with combinations". The "Quantities" tab of the product page will be renamed "Combinations" and will allow you to create your various combinations.
You cannot create combinations if you do not already have product attributes properly set in PrestaShop.
Also, you should not create a combination for features that your customers should not be able to choose from.
Attributes creation is done in the "Attributes & Features" page from the "Catalog" menu, and is explained in details in this dedicated chapter of the documentation.
To find out about Combinations, read the dedicated section at the end of this chapter.
Indicate how many products are available for sale.
This option will not be displayed if you're creating a product with combinations: quantities for combinations are managed in the "Combinations" tab, as each combination can have a different quantity value.
More quantity options are available in the "Quantity tab".
Define how much you want to sell this product.
- Price – Tax excluded. This is where you should set your price. It is independent of calculations, tax and other prices.
- Price – Tax included. Displays the price of the product with taxes included. You can edit the value, and it will automatically update the "Tax excluded" field according to the tax rule that you chose.
- Tax rule. The tax applicable to the product. Choose between the different rates that you have registered. When changing the tax rule, the tax included price will change accordingly.
More pricing options are available on the "Pricing" tab. Whether you change your price in the "Basic Settings" or "Pricing" tab is just the same, as the tabs are synchronized.
Tax rules can be managed in the "International" menu, "Taxes" page.
The "Categories" section enables you to select in which category the product should appear. You can select more than one, but keep in mind that it is better for the customer if the category only contains equivalent and comparable products. Therefore, you should prevent from selecting root categories, and prefer child categories.
For instance, the "telephone" category can feature sub-categories of "brands" (Apple, Samsung, HTC, etc.) and as well as "characteristics" (dual sim, Android, etc.). It is up to you to indicate the category most useful to your customers.
Associating existing categories
To associate a category to your product, you can either use the search bar, or expand the category list and select the one you want to associate.
Using the search bar. Type in the first letters of the category and the bar will display all the matching categories and the path to access it. Choose your category and click on it. It will be shown in the "Associated categories" section.
Using the category list. By clicking on "Expand", you will see the category tree and from there you can select the categories you want to associate.
In the list of associated categories, if you mouse over a specific category, you will see the path leading to the category. It can be helpful if you have several categories with the same name (like "Shoes" which can be under "Children" and "Women" categories).
The "main category" selector is useful when an article is filed under several categories. It serves mainly to clarify which category to use in case your customer arrives at your site from a search engine, since the name of the category will appear in the product's URL.
Creating a new category
If you feel you need to add a category, save the current state of your product before clicking the "Create new category" button.
Click on "Create a category" : the category options will appear. Fill in the name of the category and select the parent category. By clicking on create, the new category will be created and it will automatically associated with your product.
Don't forget to go to the "Categories" page later to fill in the details for this new category. To read more about categories, go to the related section of the documentation.
At this point, you are done with the essential information for a basic product page. You can save it. To have it immediately available for sale on your shop, click on "Offline": its status will change to "Online" and it will be visible on your shop.
However, you should keep reading, as there are many more details you can add to your product to make it more attractive to customers!
Product quantities are managed in a single tab. PrestaShop will use this to determine when a product is soon out-of-stock or unavailable anymore.
For a standard product you only have two fields:
- Quantity. Define how many products are for sale. It is the same value as the one in "Basic settings".
- Minimum quantity for sale. You might prefer this product to be sold in bulk. Use this field to set the number of items to be sold in bulk. It means customer will be able to purchase this product only when they reach this minimum quantity.
Product with Combinations
The way it works is quite easy: the page presents you with a table of all the combinations for the current product (if there are no combinations, the table simply has a single row). It is up to you to set the initial stock for all the combinations.
For more information on product combinations, read the dedicated section at the end of the page.
Out of stock behavior
The "Behavior when out of stock" option enables you to set PrestaShop behavior when the product is out of stock:
- Deny orders (the product is not available for sale anymore).
- Allow order (in essence, you are doing pre-sales).
- Use default behavior (Deny orders). This third and default option simple uses the global default setting ("Preferences" menu, "Products" page, "Product Stock" section, "Allow ordering of out-of-stock products" option).
- Label when in-stock. Enables you to display a message to your visitors when your product is in stock, for example "Item available". It reassures them that your shop can immediately send them the product.
- Label when out of stock and back-order active. Enables you to display a message to your visitors when your product is out of stock but they can still order it (as set using the "When out of stock" selector), for example "Pre-order now!". It reassures them that your shop will send them the product immediately once it is in stock.
- Availability date. Indicate when the product will be back in stock.
You can also configure the general settings applied to all of your products: the default option is to deny orders, but this can be modified under the "Products Settings" in the "Shop Parameters section" ("Allow ordering of out-of-stock products" option).
The "Shipping" tab enables you to give some precious details about your product's package. It isn't available in the case of a virtual product.
Package dimension (width, height, depth & weight). You should strive to fill each field, because knowing the exact size and weight of a package is not only useful to you, but PrestaShop can also direct specific sizes/weights to specific carriers automatically, based on these settings. The order's final price will appear to the customer once PrestaShop (or the customer) has selected a carrier.
These values use the default weight, volume, distance and dimension units, as set in the "Localization" page of the "Localization" menu.
These values do not have to be integers. If your products weight less than 1 lbs, you can simply use a period (.) to indicate the fractions:
- 123 lbs
- 1.23 lbs
- 0.23 lbs (equals 3.68 oz)
- Shipping fees (Additional shipping fees). This can prove very useful to you for specific products that are particularly tricky to package, or really heavy.
- Available carriers. You can choose to have the current product only be shipped by a selection of carriers. If no carrier is selected then all the carriers will be available for customer orders.
The pricing tab makes it possible to refine your pricing strategy, either by using alternative prices (price per unit), or by creating some price rules specific to the product.
The price of your product before taxes.
- Price – tax excluded. This is where you can set an arbitrary price, independent of calculations and regular prices. Keep this field at "0" to use the default price.
- Price – tax included. Displays the price of the product with taxes included. You can edit the value, and it will automatically update the "Pre-tax retail price" field according to the tax rule that you chose.
- Price per unit (tax excl.). The unit price for the product at the time of the addition. This is for valuation purpose.
- Tax rule. The tax applicable to the product. Choose between the different rates that you have registered. A link will redirect you to the Tax rule pages if you wish to make some changes. Read more about tax rules in this section.
- Display the "On sale!" flag on the product page and in the text found within the product listing. Check that box to show that your product is on sale, both on the product page and in the text on the product listing. An "On sale" icon will appear under the product. You can modify this logo by changing the following file:
- Final retail price. This price, including the discount taken, will update as you type.
You can fill out the "Price - tax excluded" field and choose the tax rate to apply, and the field will automatically calculate the retail price with taxes. The opposite operation is also available.
Enter the price you paid for the product (how much it cost you to acquire or manufacture the product), it will allow you to compare it to your selling price in order to easily calculate your profit.
The cost price should be lower than your retail price.
Specific prices: Managing Discounts
You can change the total price of the product depending on the quantity of products your customer buys, the user group, the country, etc. This is done with the "Specific prices" section of the "Pricing" tab. Click on the "Add a specific price" button to reveal the creation form:
This is a very easy way to create a discount price for this product (and all its combinations).
- For. This enables you to be very specific about the various groups to which this price applies, including currencies, countries and even your customer groups (which we'll discuss in a later chapter).
- Customer. You can choose to be even more specific and directly set at who the discount you are creating is targeted. Start typing the first letters of the clients' first name or last name, and select the ones you want.
- Combinations. You can choose to have this specific price apply to all of the product's combinations, or only one. If you wish to apply to more than one combination but not all of them, you will have to create a specific price for each combination.
- Available from/to. Here you can define a range of dates between which the discount price is active. Clicking each selector will open a calendar, simplifying the process.
- Starting at  unit. Contains the value from which the discount should be applied. Default is "1", which means any quantity. If you've selected one combination for which the specific price applies and that you define more than one unit, it means the customer will have to buy this quantity of this given combination to benefit from the discount.
- Product price (tax excl.). This is where you can set an arbitrary price, independent of calculations and regular prices. This will override the retail price. To enable this field, you must unclick "Leave initial price" first.
- Leave initial price. Check this box to reset the "Product price" field and prevent yourself from editing it.
- Apply a discount of. Use the selector to set the type of discount (either a specific amount in the default currency, or a percentage of the default price). On the product sheet, the initial price will appear as crossed out next to the discounted price.
Once you have chosen your values, click on "Apply": the summary of your discount settings appears below. The discount will be immediately visible on the store.
If you wish to delete a value, click on the trashcan icon in the table.
If you want to build more complex discounts, go read about the "Discounts" menu in the "Managing Discounts" chapter of this guide.
A customer might fit into multiple prices or discount rules, even when you have set detailed prices and quantity discounts, with custom groups and shops (if in a multistore context). PrestaShop therefore uses a set of priorities in order to apply a single price rule to such customers. You might want the user group to be more important than the currency, for instance.
You can change PrestaShop default settings using the "Priority Management" section.
The default order of importance is:
- Shop (when in a multistore context).
A checkbox at the bottom enables you to update the settings for all products. If the checkbox remains unchecked, then your changes only apply to the current product.
To improve your product listing as well as increase your store's visibility we suggest that you carefully fill out the various SEO fields: meta titles, meta descriptions, and keywords and friendly URLs.
"SEO" itself stands for "Search Engine Optimization. Read more on Wikipedia: http://en.wikipedia.org/wiki/Search_engine_optimization
Get to know the best SEO practices for e-commerce! Download and read PrestaShop's free "Complete Guide to SEO": http://www.prestashop.com/en/white-paper-seo
To access the product's SEO information, go to the "SEO" tab.
Search Engine Optimization
The fields in this page enable you to directly optimize your catalog's visibility on search engines.
- Meta title. This is the most important field, as the title that will appear on all search engines. Be very factual: you must convince the search engine user to click your link, not one from another site. Make sure the title is unique to this product within your site.
- Good example: "Levi's 501® Original Jeans - Tidal Blue - Original Fit".
- Bad example: "Item #02769869B bestseller".
- Meta description. A presentation of the product in just a couple lines (ideally, less than 155 characters), intended to capture a customer's interest. This will appear in results for some search engines, depending on the search request: some search engine might choose to display the searched keywords directly in the context of the page content. Make sure the description is unique to this product within your site.
- Friendly URL. This is another extremely important field. It enables you to rewrite the web addresses of your products as you wish. For example, instead of having an address such as
you can have:
All you need to do is indicate in the "Friendly URL" field the words that you wish to see appear instead of the default name, separated by dashes.
The "Reset URL" button makes it easy to produce a proper friendly URL based on the product name. Once generated, you can edit the URL produced if necessary.
Friendly URLs will only work if URL rewriting is enabled. You can do this in "SEO & URLs" preference page (in the "Traffic" menu), in its "Set up URLs" section.
You will find more information on the "SEO & URLs" preference page in the "Traffic" chapter of this guide.
When your product is offline, its product page will no longer available on your shop. You have to decide what you want to show to your visitors instead:
- No redirection (404). This will display a "404 error - Not found" page.
- Permanent redirection (301). This will permanently redirect the visitor to another product page. The current URL of your product page will no longer be indexed by search engines: it will be replaced by the URL of the product page of your choice. Choose which product page you would like to display instead. Remember, this is permanent, so make sure you don't need this URL anymore before activating the 301 redirection!
- Temporary redirection (302. This is a temporary redirection to another product page. Choose which product page you would like to display instead. Search engines will still index the product page URL, so you can reuse it later easily, should you reactivate the product, for example.
The "Options" tab provides additional settings to manage product references, suppliers, product customization, visibility and files.
You can choose to have the product available through different channels:
- Everywhere. Customers can get to the product by browsing the catalog, search for the product's name, or directly using its URL.
- Catalog only. Customers can get to the product by browsing the catalog or directly using its URL.
- Search only. Customers can get to the product by searching for its name or directly using its URL.
- Nowhere. Customers can only get to the product using its URL. They won't find it by browsing through the catalog or by searching for its name. This is great for creating private products, that only a few trusted visitors can access, even temporarily (you can change this setting at any time).
Options. A couple of specific options.
- Available for order. If you uncheck this box, customers will not be able to add this product to their cart. This makes it more like a single-product Catalog mode (in comparison with the "Catalog mode" preference).
- Show price. If the "available for order" option above is unchecked, you can either choose to display the product's price nevertheless (even though visitors won't be able to buy it), or choose to not display it.
- Web only (not sold in your retail store). If your business does have brick-and-mortar stores, this option will prove invaluable when a product is only sold online, not in store – this prevents customers from checking a product price online, then come to your store hoping to buy it directly, and thus avoid shipping cost.
Tags are terms and keywords that will help your customers easily find what they are looking for. When they use the search bar to browse your catalog, they will type some specific keywords. Choose the most relevant keywords to your product, to make sure the product shows in results when a visitor search for it.
To add several tags, simply separate them by a comma. For example : "dinner plate, dinnerware, stoneware" for a dinner plate.
All the tags can be seen in the "Search" page, under the "Shop Parameters" menu. You will find more information on tag management in this dedicated chapter.
Products tags are not the same as page keywords: they have no direct impact on search engine placement.
Condition & References
Condition. Not all shops sell new product and some marketplaces require this information from you. This option enables you to indicate the condition of the product:
New. The product is brand new, sealed in its original packaging.
- Used. The product has been sold at least once before, and probably used by someone else (second hand). It should come in its original packaging, which might be closed with tape.
- Refurbished. The product has been returned for various reasons ("scratches, dents or other forms of cosmetic damage which do not affect the performance of the unit"). Read more on Wikipedia: http://en.wikipedia.org/wiki/Refurbishment_%28electronics%29.
- Reference code. This is your own internal reference. It might be a number, or its reference from the storage location or its supplier, or anything that makes it unique.
- ISBN. ISBN is used internationally to identify books and their various editions. If your products are books or entitled to have an ISBN number, enter it here.
- UPC barcode. This standard for barcodes is mostly used in the United States, Canada, the United Kingdom, Australia, New Zealand.
- EAN-13 or JAN barcode. These are the numbers of the product's barcode, which are used worldwide in order to identify it. You can use either an EAN-13 or a JAN number.
- An EAN-13 is the product's 13-digit international article number. Read more on Wikipedia: http://en.wikipedia.org/wiki/International_Article_Number_%28EAN%29.
- A JAN is specific to Japan, but is compatible with the international EAN. Read more on Wikipedia: http://en.wikipedia.org/wiki/Japanese_Article_Number.
PrestaShop makes it possible for your customers to customize the product that they will buy.
Example: You are a jewelry retailer and your customers have the possibility to engrave their jewelry with a text or an image. Your customers can submit the text and/or the image when they place their order.
The advantage of this function is that it offers your customers a personal service, which they will without a doubt appreciate!
Let's look at how to configure this function. Click on "Add a customization field" to indicate what type of context (file and/or text) can be personalized. You can put as many fields as you allow your customers to upload.
- Label. Fill it with the appropriate public label: this will be an indicator for the customer, so be very specific about what you expect.
- Type. Indicate whether you want the customer to type in some text, or to provide a file.
Example 1: the customer can personalize a book cover, by providing 3 images. You can have 3 customization fields :
|Front cover (20.95 x 27.31 cm, color)||Image|
|Back cover (20.95 x 27.31 cm, black and white)||Image|
|Spine (20.95 x 1.716 cm, color)||Image|
Example 2: if customers can engrave words to a product, you could use the following:
|First line (24 chars)||Text|
|Second line (24 chars)||Text|
|Last line, signature (16 chars)||Text|
Once all the label fields have been filled, do not forget to save your changes.
On the customer's side
Once a product has customizable properties set, its front-end product page has a new blockb, below the description: "Product customization".
The customer must choose the file(s) and/or add some text and save them before they add the product in the cart.
The custom image(s) and text(s) will appear in the final cart.
The rest of the purchase process is the same as usual.
On the merchant's side
Once the order has been validated by the customer, the merchant gets a notification of the order in the back office.
He can then check on the order, which will indicate the image(s) and the text(s) in the list of products, for each product. The merchant then simply has to download the image(s) (simply by clicking on the image in the order) or copy/paste the text and use that in its customization tool.
The rest of the order and delivery process is the same as usual.
Attaching a file
PrestaShop enables you to make some files available to your customers before their purchase.
For example, let's say you sell electronics, and you would like to urge your customers to read a document on how a product works. You can upload a document for that purpose.
You could also simply have the product's PDF manual directly available for download right on the product page. The customer can access it even if they didn't purchase the product.
If you already uploaded some files to be attached, you will see here the list of the files available to be attached to the product. Simply select the file you want to attach to the product.
Attach a new file
If you haven't attached any file yet, you can upload a new file directly on this page:
- Click on "Attach a file"
- Click on "Browse" to select a file on your computer to upload.
- Fill out the title of your attachment (it doesn't have to be the same as the original file name).
- Give it a description. This will help you distinguish between your uploaded files with certainty and will give additional information to your customers.
- Click on "Add".
- The attachment appears in the "Attached files" list, already selected to indicate it will be attached to the product.
- Save your product.
A new tab will appear on the product's page, next to "Product Details", where your customers can download the file(s) that you just uploaded..
If you need to remove an attachment from this product page, you simply have to unselect it in the "Attached files" table.
You can view all of your store's attached files, add some more and remove some, by going to the "Files" page under the "Catalog" menu. This also makes it possible to use the files that you already uploaded for other products: if you need to apply the associated one file with many products, you will thus only have to upload it once.
Indicating the product's supplier is not really important to your customers (very much less so than its brand in any case), but it may turn out to be an essential part of your own internal management, not the least when managing your stock: you simply need to know who you bought the product from. The supplier of the current product is to be set from the "Suppliers" section of the "Options" tab.
You cannot use this feature if you do not already have at least one supplier registered in your shop. Suppliers are created from the "Brands & Suppliers" page, under the "Catalog" menu.
The complete supplier registration process is explained in details in a dedicated chapter of this guide.
Associating the current product with one or more suppliers is really easy: simply check the box corresponding to the supplier, and save your changes.
The supplier's section also features a table that enables you to set the precise reference and unit price/currency for each product combination, per supplier. If the product has more than one supplier, the table will display each supplier one after the other.
There are many more product-related options in the "Product settings" page from the "Shop parameters" menu:
- Number of days for which the product is considered 'new'.
- Default product order.
- Enable advanced-stock management.
You should really check that these global settings are set as you wish.
Creating a product with combinations
To enable product combinations, you must first choose the "Product with combinations" option from the "Basic Settings" tab. You will see the "Quantities" tab change to "Combinations", and this is where you will be able to manage your product combinations.
Combinations cannot be created for pack of product or virtual products: it is only available for standard products.
You cannot create combinations if you do not already have product attributes properly set in PrestaShop.
Also, you should not create combination for features that your customers should not be able to choose from.
Attributes creation is done in the "Product Attributes" page from the "Catalog" menu, and is explained in details in the chapter of the same name of this guide.
How your product attributes are combined into combinations is up to you, and PrestaShop gives you two methods to achieve this.
This method helps you create combinations one after the other. Therefore, it is to be reserved to either products with few combinations, or products with very specific combinations that can't be created reliably using the automatic method (see next section).
Adding a new variation to your product takes just a few steps.
- In the combination bar, enter the combination of attributes you need to create, with their corresponding values.
For example, if you need to create a combination for a t-shirt, size M and color red, you should enter "size m color red". As you type in, you will see suggestions appearing below the bar, simply select the attributes and values you need.
You can add as many attribute-value pairs as necessary to one combination.
You can only add one pair per attribute to one combination: it is impossible to have both "Color: Blue" and "Color: Red" in your pairs; if this is necessary, you will have to create new attributes, for instance "Primary color" and "Secondary color".
You can delete an attribute-value pair by clicking on the cross in its grey box.
2. When you have all the needed attributes, click on "Generate" on the right.
3. The combination will appear in a table below.
If you have too many different products versions or varieties, you can use the "Product Combinations Generator." This tool allows you to automatically generate all of the combinations and possibilities.
Instead of typing each combination you want, you can use the selector on the right side of the page. It lists all the attributes and their corresponding values.
Here's how you should do:
- For each attributes, tick the values you want to add as combinations. You can select several values for each attributes to save some time.
- It will automatically add the corresponding combinations in the bar on the left.
- If you're happy with you selection, click on "Generate": it will automatically create your combination, with all the possible combinations.
For a single combination, you can edit its quantity directly in the table, edit it (by clicking on the pencil icon) or delete it (with the trash icon).
When you have several combinations available, you should choose which combinations will be the default combination. It will be the combination your customers see when they arrive on the product sheet. If they want to purchase another combination, they will have to select it themselves (by either changing the color, size or any attribute you may have).
Editing a combination
Each combination can be further managed by clicking on the edit icon. It will open a small window when you can change the details for this specific combination.
- Combination details
- Set as default combination. Check this box if you want the combination you are creating to actually be the main one for this product.
- Quantity. Enter the quantity available for sale for this combination
- Available date. If the combination is out of stock, you can indicate when it will be available again.
- Minimum quantity for sale. You might prefer this combination to only be sold in bulk. Use this field to set the number of items to be sold in bulk. It means customer will be able to purchase this product only when they reach this minimum quantity for this combination.
- Reference and Specific references (ISBN, EAN-13 & UPC). If necessary, indicate the combination's reference, ISBN EAN-13 and/or UPC numbers into each field, as if you were creating a brand new product in PrestaShop. These numbers may be used by your warehouse or your carrier, so make sure to fill these fields, they are often essential to your business.
- Price and impact
- Cost price. This field is useful if the original price of the product changes simply because this is a combination.
- Impact on price/price per unit/weight. If the combination is supposed to have an impact on the product's original price/weight/unit price, fill the field that appears with the value of that impact (e.g. "-2" if the price should be decreased by 2).
- Image. The images that are linked to the original product (as uploaded using the form in the "Images" tab on the left) are displayed. Check the box for the images that best represent this combination.
Once you finished editing a combination, you can either:
- go to the previous or next combination to edit it as well, by clicking on "prev. combination" or "next combination"
- go back to the product by clicking on "back to product" at the end of the page
You can change the details for all or several combinations at once.
- Select the combinations you want to edit. Click right under "Select" to select them all.
- Click on "Bulk actions" above the list of combinations.
- Edit the settings you want to modified. It will be modified for all the combinations you have selected.
- Click on "Apply" to edit the combinations.
If you want to delete all the combinations you've selected, click on "Delete combinations".
When you have set all of the combination's details, save your product changes using the "Save and stay" button. Your combination will appear in the attributes list at the bottom of the screen.
Creating a virtual product
Your shop may feature (partly or exclusively) virtual products – that is, products that are not shipped, but rather downloaded: entertainment tickets, e-books/PDF files, real-life services...
PrestaShop makes it easy for you to create a virtual product.
The process to do this is similar to the one for creating a simple product:
- Go to the "Products" page, under the "Catalog" menu.
- Click the "New product" button.
- Next to the product name, change the product type to "Virtual Product".
The page organization will change:
- The "Quantities" tab becomes "Virtual Product".
- The "Shipping" tab disappears.
The "Virtual Product" tab only features one option at first: it asks if the virtual product you are creating has a file attached (i.e., if your customer will pay to download something).
- If not, leave it at that: you are selling a service, and nothing needs to be downloaded.
- If yes, click the "Yes" option.
When you click "Yes", PrestaShop opens a new form within the tab, from which you can upload the file you intend to sell:
File. Click the "Browse" button to find the file on your hard drive. As soon as you have selected a file, the upload begins.
The maximum file-upload size setting depends on your server's settings, and cannot be increased from PrestaShop.
If you have access to your server's
php.inifile, these are the values you should change:
upload_max_filesize = 20M
post_max_size = 20M
If you do not have access to the
php.inifile, contact your web host about this.
- Filename. The name of the file. This field is automatically filled after the file has been uploaded. It is not recommended to change it to another value.
You should compress your file in zip format, in order to avoid the browser misinterpreting
.jpgfile formats. Browsers automatically download zip files for the customer, no question asked.
If you are selling a high resolution image, uploading it using this form does not prevent you from uploading its thumbnail in the "Images" tab on the left.
- Number of allowed downloads. You can set the number of time the file can be downloaded once the customer has bought it. You might prefer to limit this to 1, or 5. If you want to keep it unlimited, set the text field to 0.
- Expiration date. Virtual files can be of promotional nature, or lose their selling value after a certain date. If so, you can set the expiry date after which the product will not be available on your shop anymore. Leave it blank if there is no expiry date.
- Number of days. You can set the number of days after which the download link becomes non-functioning. If there is no limit, set the text field to 0.
Once you are done with the "Virtual Product" tab, you can edit all the other available tabs as if you would for a regular product.
Creating a pack of products
You may wish to sell a pack of products made of several items. I.e.: a computer start-up pack composed of the computer itself, a monitor, and a printer. PrestaShop makes it easy for you to create a "pack" product and add other products from your catalog to this pack.
Packs enable you to simplify preparing orders. They also allow customers to take advantage of special prices and offers.
You cannot currently add combinations or virtual products to a pack.
If you need to have packs with combinations, you will have to create single products for each combination. This is a known limitation that will be fixed in a coming version of PrestaShop.
You cannot add an existing pack within a new pack, or import the content of an existing pack into a new pack.
The process to create a pack is similar to the one for creating a regular product:
- Go to the "Products" page, under the "Catalog" menu.
- Click the "New product" button.
- Next the product name at the top, change the product type to "Pack of products ".
This will change two things:
- In "Basic settings" you can choose which products are part of the pack
- In "Quantities" you can select how stocks should be handled.
Adding products to your pack
- The first field is used to search for products that are already registered in your shop.
- The second field is used to indicate the quantity of chosen product should be added to the pack.
- The button adds the product to the pack.
You can add as many products as you would like to the pack.
You can remove a product from the pack simply by clicking the trashcan icon when you hover on it.
Managing pack quantities
When you are creating a pack of products, PrestaShop needs to know how to handle the stock. In the "Quantities" tab, under "Pack quantities", you must choose one of the following options:
- Decrement pack only (default behavior). When a pack is sold, only the stock for the pack will be impacted.
- Decrement products in pack only. When a pack is sold, only the stock for each product will be impacted.
- Decrement both. When a pack is sold, both the stock for the pack and the stock for each product will be impacted.
- Default behavior. This is the default behavior as set at the shop level in your Product Settings. By default you will have "Decrement pack only" but it will change according to your choice.
Once you are done with the "Pack" tab, you can edit the content of all the other available tabs as if you would for a regular product.
12 essential tips to create an efficient product page